L200 L4-2.2L VIN F (2002)
![background image](/saturn/l200/l4-2.2l_vin_f/Page-2415010.png)
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the seat back to the seat cushion frame and install the bolts.
Tighten the bolts to 35 Nm (26 lb ft).
2. If the seat back cover is being replaced, transfer the seat cover upper wire to the new seat back cover.
3. Install the seat back pad to the foam.
4. Install the pad backing to the tabs on the seat back frame.
5. Install the seat back cover trim starting at the top.