L200 L4-2.2L VIN F (2002)
5. Remove ABS control module mounting nuts and bracket.
NOTICE: Be careful not to bend brake pipes.
6. Remove ABS control module from vehicle.
DISASSEMBLY
IMPORTANT: Do not attempt to repair damaged solenoid pack or control unit assemblies. Repair of these assemblies is not possible. Do not
lubricate or oil the EBTCM.
1. Disconnect pump motor electrical connector.
2. Remove EBTCM to BPMV screws.
3. Separate EBTCM from BPMV.
ASSEMBLY
1. Position EBTCM on BPMV.
2. Install attaching screws.
3. Connect pump motor electrical connector.
INSTALLATION