L200 L4-2.2L VIN F (2002)
Parking Brake Cable: Service and Repair
Park Brake Cable (at Rear Corner)-Disc
PARK BRAKE CABLE (AT REAR CORNER)-DISC
REMOVAL
1. Disengage console park brake boot by squeezing boot on sides while pulling upward.
2. Loosen park brake adjusting nut to allow slack in cable.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP AVOID
PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE
OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED.
3. Raise vehicle on hoist.
4. Disconnect rear park brake cable to front park brake cable and discard clip.