L200 L4-2.2L VIN F (2002)
Evaporator Core: Service Precautions
CAUTION:
^
TO AVOID CUTTING INTERNAL COMPONENTS, CUT ONLY INSIDE RAISED BEAD AREA.
^
WHEN APPLYING COOLING COIL COATING (P/N 12346390), ORDINARY SAFETY GLASSES ARE NOT SUFFICIENT.
^
MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID PERSONAL
INJURY, PROVIDE ADDITIONAL SUPPORT TO OPPOSITE END OF VEHICLE THAT COMPONENTS ARE REMOVED FROM.
^
THE FOLLOWING PROCEDURE SHOULD ONLY BE PERFORMED ON A COLD VEHICLE. IT HAS BEEN DEMONSTRATED
THAT IRRITATING VAPORS WILL BE FORMED IN THE ENGINE COMPARTMENT IF THE COOLING COIL COATING
COMING OUT OF THE DRAIN OUTLET CONTACTS HOT ENGINE COMPONENTS. COOLING COIL COATING CAN CAUSE
SUBSTANTIAL, BUT TEMPORARY EYE INJURY. DO NOT GET COOLING COIL COATING IN EYES OR ON CLOTHING.
WASH THOROUGHLY WITH SOAP AND WATER AFTER HANDLING.
^
TO AVOID CUTTING INTERNAL COMPONENTS, CUT ONLY INSIDE THE RAISED BEAD AREA.