L200 L4-2.2L VIN F (2002)
4. Re-assemble the cable.
^
Rewrap the conductors with the mylar tape. Use caution not to wrap the drain in the tape (1).
^
Follow the splicing instructions for copper wire and splice the drain wire.
IMPORTANT: Apply the mylar tape with the aluminum side inward. This ensures good electrical contact with the drain wire.
^
Wrap the drain wire around the conductors and tape with mylar tape.
5. Tape over the entire cable. Use a winding motion when you apply the tape.
Weather Pack Connectors
TERMINAL REMOVAL