L200 L4-2.2L VIN F (2002)
Transmission Position Switch/Sensor: Service and Repair
TRANSAXLE RANGE SWITCH
TOOLS REQUIRED
-
J41545 Park Neutral Position Switch Tool
REMOVAL
1. Apply parking brake and place control assembly in Neutral. (The transaxle manual shaft must be in Neutral position prior to re-installing the range
switch.)
2. Remove shift control cable from transaxle range switch lever.
3. Disconnect electrical connectors from transaxle range switch.
4. Remove transaxle range switch lever nut and lever.
5. Remove transaxle range switch bolts and remove switch.
INSTALLATION (USING OLD SWITCH)
1. Make sure transaxle manual shaft is in Neutral position.
2. Align flats on transaxle shift shaft with flats on transaxle range switch and install switch.