L200 L4-2.2L VIN F (2002)
Malfunction Lamp / Indicator: Description and Operation
AIR BAG TELLTALE
When ignition is switched On, system voltage is applied to terminal Al of the SDM from the IGN 1 fuse in the UHFB. The SDM self-checks the system
voltage and deployment loops while the UP cluster performs a bulb check by flashing the AIR BAG telltale seven times. If a diagnostic trouble code is
detected, the SDM will command the I/P cluster to light the AIR BAG telltale when the bulb check is complete. If no DTC is detected, the telltale will
not light. The SDM communicates with the I/P cluster on circuit 1807.