L200 L4-2.2L VIN F (2002)
NOTICE: Hold ball stud from turning when installing nut. The boot can become torn and damaged if the ball stud turns.
13. Install stabilizer bar link-to-strut assembly
^
Stabilizer Bar Link-to-Strut: 65 Nm (48 ft. lbs.)
14. Inspect boot for damage and replace if damaged.
15. Install rear transaxle mount.
16. Install rear transaxle mount to frame bolts.
^
Rear Transaxle Mount-to-Frame Bolts: 60 Nm (44 ft. lbs.)
17. Install power steering high pressure and return lines.
^
Power Steering Lines-to-Steering Gear: 27 Nm (20 ft. lbs.)
