L200 L4-2.2L VIN F (2002)
8. Remove routed harnesses. (Engine, Forward Vamp and I/P)
a. Engine
b. Forward Lamp
c. Instrument Panel (I/P)
IMPORTANT: There are two tabs that hold the hard shell grommets in place at the bottom of the grommet. Disengage these tabs and slide grommet
off.
9. Remove bolt on the bottom of the fuse block case and lift case off the battery tray.
10. Remove battery tray.
11. Install Engine Support Fixture SA9150BR (or equivalent) and Engine Support Fixture Adapter J43405 (or equivalent). (L61 engine)