L300 V6-3.0L VIN R (2001)
1. Position the headliner rear molding at the attaching clip locations.
2. Snap the molding into place by gently pushing at the clip locations.
3. Install the left and right side of the quarter glass upper moldings.
Trim Replacement-C-Pillar
Trim Replacement-C-Pillar
Removal Procedure
1. Remove the rear seat shoulder belt cover to expose the shoulder belt fastener.
2. Remove the shoulder belt fastener and the shoulder belt.
3. Lower the rear seat back.
4. Route the shoulder belt out of the C-pillar trim at access slot.
5. Remove the C-pillar trim assembly by pulling gently at the C-pillar trim clip locations.
Installation Procedure