L300 V6-3.0L VIN R (2001)
1. Guide the seat back assembly onto the center pivot pin. Ensure that the seat back locates into the inner pivot tabs.
2. Align the outer pivot pin with the lead in the ramp on the Easyload bracket.
3. Push downward on the seat back to engage the Easyload bracket.
4. Raise the seat backs and secure the seat back latch.
5. Install the seat cushion. Refer to Rear Seat Cushion Replacement (See: Seat Cushion/Service and Repair/Rear Seat Cushion Replacement).