L300 V6-3.0L VIN R (2001)
5. Remove caliper-to-bracket guide pins.
6. Remove caliper from support bracket.
7. Remove Pads from caliper and inspect;
^
Guide pin sleeves and covers for damage. If damaged, replace.
^
Piston boot for deterioration. If damaged overhaul caliper.
^
Guide pin for damage or corrosion. Replace if damaged or corroded (do not attempt to clean away corrosion).
Disassembly
1. Using a small screwdriver, remove piston boot. (Slowly pry up one end of boot).
CAUTION: TO PREVENT BODILY INJURY, MAKE SURE TO KEEP FINGERS OR OTHER BODY PARTS AWAY FROM PISTON
DURING REMOVAL.
NOTICE: Pad interior of caliper body to provide a protective cushion for piston when it exits the caliper. This will protect piston from surface
damage caused from piston/caliper body contact.