L300 V6-3.0L VIN R (2001)
4. Position radiator degas hose between washer fluid neck and fender rail.
5. Install radiator degas hose to surge tank fitting. Install radiator degas hose to surge tank clamp at 12 o'clock position.
6. Install left headlamp assembly bolts:
Torque:
Left Headlamp Assembly Bolts: 10 Nm (89 inch lbs.)
7. Install radiator degas hose to radiator clamp at 1 o'clock position.
8. Install cooling fan relay module on battery bracket.
9. Fill cooling system.
10. Use fresh water to rinse away coolant that was spilled during service.