L300 V6-3.0L VIN R (2001)
Coolant Temperature Sensor/Switch (For Computer): Description and Operation
General Information
The Engine Coolant Temperature (ECT) sensor is a thermistor which changes resistance to reflect changes in temperature. When the ambient
temperature is low, the resistance of the ECT is high. When the ambient temperature is high, the resistance of the ECT is low. The ECT has a signal
circuit and a ground circuit. The ECM supplies 5 V to the signal line which is pulled-up through a pull-up resistor. The signal voltage is monitored for
changes in sensor resistance in order to determine engine coolant temperature.
The ECT signal is used by the ECM for fuel control, ignition timing, EGR operation, EVAP canister purge control, and closed loop fuel operation.
The ECT sensor is used by the ECM for fuel control (calculation of temperature of air/fuel mixture at the intake valve in conjunction with the IAT sensor
temperature), Coolant Temperature telltale illumination, coolant temperature gauge position and cooling fan operation (fan control 1 and 2 logic signals
to the cooling fan control module). The ECM also uses the ECT sensor for ignition timing, EVAP purge solenoid control, idle speed control and oil life
monitoring.
