L300 V6-3.0L VIN R (2001)
23. Verify battery tray is clean.
24. Install battery.
25. Install battery hold down/fan control module bracket.
Torque:
Battery Hold-Down Bracket: 20 Nm (15 ft. lbs.)
NOTICE: Battery life is reduced if battery insulating cover is not used.
26. Install battery insulating cover.
27. Install fan control module by sliding down onto bracket.
28. Connect positive battery cable.
Torque:
Battery Terminal Bolts: 17 Nm (13 ft. lbs.)
29. Connect negative battery cable.
Torque:
Battery Terminal Bolts: 17 Nm (13 ft. lbs.)
30. Fill cooling system.
31. Use fresh water to rinse away any coolant that was spilled during service.
