L300 V6-3.0L VIN R (2001)
11. Install oil filter housing.
12. Install crank sensor.
13. Install crank sensor bolt.
Torque:
Crankshaft Position Sensor Bolt: 8 Nm (71 inch lbs.)
14. Lower vehicle.
15. Install oil feed and install return lines to engine oil cooler. Use four new seals.
Torque: Oil Cooler Feed and Return Lines to Engine Block: 30 Nm (22 ft. lbs.)
16. Install engine oil cooler line clamp.
17. Install coolant bridge.
18. Install intake manifold and spacer.
19. Check and fill engine oil as necessary.