L300 V6-3.0L VIN R (2001)
Tighten
Tighten the fuel line bracket bolt to 8 Nm (71 lb in).
3.
Install new rear timing belt cover that came in the kit.
4.
Install rear timing belt cover bolts.
Tighten
Tighten the rear timing belt cover bolt to 8 Nm (71 lb in).
5.
Coat threaded pin with Threadlocker Loctite(R) 242 compound or equivalent.
6.
Install rear timing belt threaded pin.
Tighten
Tighten the timing belt cover threaded pin to 10 Nm (89 lb in).
7.
Install knock sensor 1 pigtail into the three clips on rear timing belt cover.
8.
Install new timing belt tensioner bracket with tensioner and idler that came in the kit.
9.
Install timing belt tensioner bracket bolts.
Tighten
Tighten the rear timing belt cover thread pin to 8 Nm (71 lb in).