L300 V6-3.0L VIN R (2001)
4. Remove rear exhaust manifold pipe to exhaust manifold pipe nuts.
5. Pull down rear exhaust manifold pipe just enough to remove gasket.
6. Remove old gasket and discard.
INSTALLATION
1. Install a new gasket onto exhaust manifold studs.
2. Install rear exhaust manifold pipe to exhaust manifold nuts and tighten.
Torque:
Exhaust Manifold Pipe-to-Exhaust Manifold Nuts: 30 Nm (25 ft. lbs.)
3. Install rear exhaust manifold pipe to front exhaust manifold pipe bolts and tighten.
Torque:
Exhaust Manifold Pipe Bolts: 20 Nm (15 ft. lbs.)