L300 V6-3.0L VIN R (2001)
90. Install heater outlet hose (closest to passenger side).
90.1 Hold hose by white quick connect collar and slide onto heater core pipe until quick connect collar engages over bead on heater core pipe.
90.2 Ensure that a green band is visible in quick connect collar.
90.3 Pull on hose to make sure it is properly seated.
91. Remove protective cap from TXV.
92. Thoroughly clean the O-ring surfaces of the TXV.
93. Remove cap and install new O-rings to suction/liquid line assembly block.
94. Lubricate the O-rings with clean mineral oil.
95. Install suction/liquid line assembly block to TXV.
IMPORTANT: On earlier vehicles a bolt was used instead of a stud/nut.
96. Install suction/liquid line assembly to TXV nut.
Torque:
Suction/Liquid Line Assembly-to-TXV Bolt: 7 N.m (62 in-lbs)
