L300 V6-3.0L VIN R (2001)
Receiver Dryer: Service and Repair
CONDENSER-RECEIVER/DEHYDRATOR
REMOVAL
1. Disconnect negative battery cable.
IMPORTANT: Verifying the purity of the refrigerant with a purity identifier before recovery is recommended.
2. Recover refrigerant using an approved refrigerant recovery system. Measure the amount of oil removed during recovery and record.
3. Disconnect pusher fan electrical connector.
4. Remove pusher fan harness from puller fan shroud tabs and push harness clear of radiator end tank.
CAUTION: DO NOT REMOVE HOSES OR LINES BEFORE SYSTEM IS FULLY DISCHARGED.