L300 V6-3.0L VIN R (2001)
Service Port HVAC: Service and Repair
Valve Core - Low Side
TOOLS REQUIRED
^
SA9149AC- 7 Valve Core Remover
REMOVAL
1. Discharge refrigerant system using an approved refrigerant recovery system.
2. Remove valve core using Valve Core Remover SA9149AC-7.
INSTALLATION
1. Install and tighten valve core with tool number SA9149AC-7.
2. Evacuate, charge, and leak test A/C system.
NOTE: To prevent loss of refrigerant charge, make sure to install and tighten cap. Replace cap if seal is missing or damaged.