L300 V6-3.0L VIN R (2001)
6. Remove front intake plenum hose clamps, pipe bolts, and plenum bolts.
7. Lift plenum and remove throttle body heater hoses.
NOTICE: Mask off the ports to the intake manifold. Severe damage may result if foreign objects enter the engine.
8. Remove intake plenum.
NOTICE: It is not necessary to remove the rear intake runner.
9. Remove front intake runner.
10. Remove throttle body nut and throttle body assembly.
INSTALLATION
1. Install throttle body gasket to plenum.
2. Install throttle body to plenum.
3. Install throttle body nuts.
Torque:
Throttle Body Nut: 8 Nm (71 inch lbs.)
