L300 V6-3.0L VIN R (2001)
4. Install and tighten transaxle mount to frame attachment fastener.
Torque: Rear Transaxle Mount-to-Frame Bolts: 60 Nm (44 ft. lbs.)
IMPORTANT: On L61 engines, be sure transaxle mount heat shield is in place.
5. Install transaxle mount to engine mount bracket through bolt.
Torque: Rear Transaxle Mount Through Bolt: 90 Nm (66 ft. lbs.)
6. On vehicles equipped with L81 engines, Install rear exhaust manifold pipe heat shield.
Torque: Exhaust Manifold Pipe Heat Shield Bolts (L81): 8 Nm (71 inch lbs.)
