L300 V6-3.0L VIN R (2001)
Pressure Control Solenoid
2. Install Pressure Control Solenoid (PCS) with two O-rings and screen and PCS retainer clip.
2-3 Shift Solenoid
3. Install 2-3 shift solenoid with O-ring and 2-3 shift solenoid retainer clip.
1-2 Shift Solenoid
4. Install 1-2 shift solenoid with O-ring and 1-2 shift solenoid retainer clip.
5. Install transaxle case side cover.
6. Start engine, warm up transaxle, and check for leaks.
7. Check for proper fluid level.