L300 V6-3.0L VIN R (2001)
6. Install new filter neck seal into transaxle case. A large socket can be used as an installation tool. Two mallets can be used as well.
7. Coat filter O-ring seal with a small amount of petroleum jelly, and install filter into transaxle case.
NOTICE: Push straight up on center of valve to prevent damage to case.
8. Install oil level control valve.
9. Install transaxle oil pan and gasket.
10. Lower vehicle.
11. Remove A.I.R.
12. Add DEXRON(R) III (P/N 21019223) transaxle fluid (or equivalent).
13. Start engine, warm up transaxle, and check for leaks.
14. Check fluid level.