L300 V6-3.0L VIN R (2001)
Shifter A/T: Service and Repair
Control Assembly Boot/Control Indicator Bezel
CONTROL ASSEMBLY BOOT/CONTROL INDICATOR BEZEL
REMOVAL
1. Pull control assembly boot down to disengage boot from knob.
2. Using a screwdriver, remove control lever knob retainer. Remove control lever knob.
3. Pull up on control boot until indicator bezel disengages from console.
4. Disconnect indicator bezel electrical connector. Remove bezel and boot.
5. Disengage control boot from indicator bezel from underside of bezel. Remove boot.
INSTALLATION