L300 V6-3.0L VIN R (2001)
7. Remove clutch master cylinder push rod from clutch pedal.
8. Remove clutch master cylinder mounting nuts and remove master cylinder.
INSTALLATION
1. Transfer clutch master cylinder hose to new clutch master cylinder.
2. Install clutch master cylinder and mounting nuts.
Torque: Clutch Master Cylinder Mounting Nuts: 20 Nm (15 ft. lbs.)
3. Connect clutch master cylinder rod to clutch pedal.
4. Install left lower I/P closeout panel (hush panel).
5. Install clutch master cylinder hose to brake master cylinder.