L300 V6-3.0L VIN R (2001)
Hydraulic Hose: Service and Repair
CLUTCH SYSTEM HYDRAULIC LINE
REMOVAL
1. Remove battery.
1.1. Disconnect battery cables (negative first, positive second).
1.2. Move fan control module. Leave wiring connected, lift module up and from bracket, and position out of the way.
1.3. Remove battery hold down bracket.
1.4. Remove battery.
2. Disconnect battery feed to Under Hood Fuse Block (UHFB).
3. Disconnect coolant hose from UHFB.
4. Release retaining tabs on UHFB cover and remove.
5. Release retaining tabs (2) on UHFB and roll fuse block back (1) to access electrical connectors.
