L Series V6-3.0L VIN R (2004)
2. Install the TXV using J 44655 to support the evaporator pipes and mounting flange while installing the TXV.
1. Orient the TXV with the dome-shaped end toward the passenger side of the vehicle
2. Install the cap screws through the T-handle and through the TXV
3. Thread the 2 cap screws into the evaporative core flange
4. Pull the T-handle back against the cap screws and carefully install and seat the TXV into position
5. Carefully remove cap screws and T-handle
3. Ensure that the TXV is completely installed. The TXV should be almost flush with the edge of the bevel of the foam seal.