L Series V6-3.0L VIN R (2004)
Seals and Gaskets: Service and Repair
Torque Converter, Turbine Shaft Seal Replacement
Torque Converter, Turbine Shaft Seal Replacement
Removal Procedure
1. Remove the transaxle assembly from the vehicle.
2. Remove the torque convertor assembly from the transmission.
3. Remove the torque convertor O-ring seal from the end of the turbine shaft. Use a screwdriver.
Installation Procedure
1. Install a new torque convertor O-ring seal on the end of the turbine shaft.
2. Install the torque convertor onto the transmission.