L Series V6-3.0L VIN R (2004)
Transmission Position Switch/Sensor: Service and Repair
PNP Switch Replacement
Tools Required
^
J41545 Park/Neutral Switch Aligner
Removal Procedure
1. Apply the parking brake and place the control assembly in Neutral. The transaxle manual shaft must be in the Neutral position prior to installing
the range switch.
2. Remove the shift control cable from the transaxle range switch lever.
3. Disconnect the electrical connectors from the transaxle range switch.
4. Remove the transaxle range switch lever nut and lever.
5. Remove the transaxle range switch bolts and remove the switch.
Installation Procedure (Old Switch)