L Series V6-3.0L VIN R (2004)
Axle Shaft: Service and Repair
Wheel Drive Shaft Replacement
Tools Required
^
J44015 Steering Linkage Installer
^
SA91100C Tie Rod Separator
Removal Procedure
1. With the vehicle on the ground, depress the brake pedal and remove the cotter and drive axle nut. Discard the nut and cotter.
2. Raise the vehicle on a hoist.
3. Remove the wheel and tire assembly.
4. Remove the tie rod end torque prevailing nut and discard the nut.
Notice: Do not attempt to separate the joint using a wedge-type tool because seal may be damaged.
5. Using the SA91 100C, separate the tie rod end from the steering knuckle.