L Series V6-3.0L VIN R (2004)
Shift Interlock Switch: Service and Repair
Shift Lock Solenoid/Switch Assembly Replacement
Removal Procedure
1. Disable the SIR system.
2. Remove the automatic transaxle control assembly.
3. Using an electrical terminal pick, remove the shift lock control solenoid electrical terminals (black wires) from the connector body.
4. Move the control assembly out of the PARK (P) position and remove the park lock switch by pressing the switch retaining tabs.
5. Remove the park lock switch connector body from the control assembly, and remove the switch assembly.
Installation Procedure
1. Install the connector body to the control assembly.
2. Install the park lock switch to the control assembly.