L Series V6-3.0L VIN R (2004)
1. Remove the connector position assurance (CPA) device and/or the secondary lock.
2. Disconnect the connector from the component or separate the connectors for in-line connectors.
3. Remove the terminal position assurance (TPA) device.
4. Insert the proper pick or removal tool into the front of the connector body.
TERMINAL REPAIR PROCEDURE
Pull-to-seat connector repair kits are available through Saturn Service Parts. The repair kits include the connector with terminals attached to a short
length of the wire and splice sleeves. Use these kits if the pull-to-seat connectors need to be repaired.
Micro .64 Connectors
MICRO .64 CONNECTORS
TERMINAL REMOVAL PROCEDURE
1. Locate the lever lock on the wire dress cover. While pressing the lock, pull the lever over and past the lock.
2. Disconnect the connector from the component.