LS2 V6-3.0L VIN R (2000)
CD Changer: Service and Repair
Body CD Jumper Installation
16. Remove right side carpet retainer (sill plate).
a. Move front seat to forward most position.
b. Starting at front of vehicle, remove carpet retainer by gently pulling on retainer at attaching clip locations.
IMPORTANT: If leather seats, move rear seat cushion forward before removing bolster to avoid damage to leather. If the seat is not leather,
movement is not necessary.
17. Remove right rear seat bolster.
a. Reach down into the outer corner of rear seat cushion to expose bolster retainer tab.
b. Bend tab upward.
c. Starting at the bottom, pull forward to disengage bolster from retainer tab, then pull upward to disengage upper attachment.
IMPORTANT: If the vehicle is a wagon, proceed to step 19.