LS2 V6-3.0L VIN R (2000)
2000 S-Series Coupes
NOTICE:
If drill bit is allowed to drill into sheet metal at a depth greater than 6.5 mm (1/4 in.), outer surface of exterior panel may be penetrated.
IMPORTANT:
Due to stiffness of cable conduit, it may be necessary to pre-bend cable conduit prior to handle installation.
21.
Center-punch and drill 3 mm (1/8 in.) hole at mark on decklid.
22.
Install release handle with one release handle-to-decklid fastener (P/N 11515005 included in kit).
Torque: 2.6 N.m (23 in-lbs)