LS2 V6-3.0L VIN R (2000)
23.
Obtain replacement passenger inflator module P/N 24431683.
Important
The harness exits the inflator module on the right side of vehicle.
24.
Insert inflator module through I/P opening with vinyl edge UP and harness on right side of vehicle.
Important
The harness connected to the inflator module (1) must be routed between the round guide pin and the inflator module mounting ear.
25.
Insert inflator module guide pins in I/P brace slots and rotate round edge upward to align bolt holes.
26.
Install fasteners securing inflator module to I/P support beam.
Tighten
Tighten Passenger Inflator Module (Air Bag) bolts to 10 Nm (89 in lbs).
27.
Connect yellow 2-way connector to the vehicle wiring harness and install CPA retainer.
28.
Install pigtail connection rosebud to I/P support beam.
29.
Install glove compartment bin partially into opening.
30.
Secure BCM to glove compartment bin slots.