LS2 V6-3.0L VIN R (2000)
IMPORTANT: Cut leads with terminals are available from Saturn Service Parts for terminal replacement.
Terminal Removal
1. Remove any terminal position assurance (TPA) locks.
2. Insert the terminal lock release tool into the front of the connector cavity. Pull the wires and terminal out of the back of the connector.
Pull-to-Seat Connectors
TERMINAL REMOVAL
IMPORTANT: Pull-to-seat connectors repair kits are available through Saturn Service Parts. The repair kits include the connector with terminals
attached to a short length of wire and crimp and seal splices. Use these kits if the pull-to-seat connector needs replacement.
Weather Pack Connectors
TERMINAL REMOVAL
1. Remove any terminal position assurance (TPA) devices.
2. Insert the weather pack removal tool into the front of the terminal cavity.
Splice Pack Repair