LS2 V6-3.0L VIN R (2000)
Fluid - A/T: Service and Repair
Transaxle Fluid/Filter Replacement
REMOVAL
CAUTION: MAKE SURE THE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST.
1. Position vehicle on a hoist and raise vehicle.
2. Place a drain pan under transaxle oil pan.
3. Remove oil pan bolts from front and sides only.
4. Loosen rear oil pan bolts approximately four turns.
NOTICE: Pry the oil pan carefully in order to prevent damage to transaxle case or oil pan sealing surfaces.
5. Lightly tap oil pan with a rubber mallet or carefully pry in order to allow oil to drain.
6. Inspect fluid color.
7. Remove remaining oil pan bolts, and oil pan.
8. Remove oil pan gasket.