LS2 V6-3.0L VIN R (2000)
Fluid Line/Hose: Service and Repair
Transaxle Oil Cooler Line Seals
Tools Required
-
J41239-2 Cooler Line Seal Removal Tool
-
J41239-1 Cooler Line Seal Installer
REMOVAL
1. Place drain pan or suitable container under vehicle.
2. Remove transaxle oil cooler line assembly from transaxle only. Position oil cooler line away from cooler line seals on transaxle.
IMPORTANT: In order to remove top transaxle cooler seal, the front transaxle mount must be removed.
3. Wedge cooler line seal remover J41239-2 into transaxle cooler line seal on outside of case bore.
4. Remove transaxle oil cooler line seal by prying out of case. If necessary, strike seal remover with a hammer.
INSTALLATION