LW100 L4-2.2L VIN F (2002)
Rear Door Weatherstrip: Service and Repair
Weatherstrip - Center Pillar
TOOLS REQUIRED
J 36346 Fascia Retainer Remover
REMOVAL
1. Open both front and rear doors.
2. Remove center pillar weatherstrip using Fascia Retainer Remover J 36346, to release snap fasteners.
3. Remove center pillar weatherstrip.
INSTALLATION
1. Open both front and rear doors.
2. Install center pillar weatherstrip by snapping three fasteners into body structure using firm pressure.
3. Close doors and verify proper seal and alignment.
