LW100 L4-2.2L VIN F (2002)
4. Install engine mount to bracket bolts.
Torque:
Engine Mount-to-Engine Mount Bracket Bolts: 55 Nm (41 ft. lbs.)
5. Install air cleaner assembly.
5.1.
Install air box. Ensure that lower pin engages into rubber mount grommet and that lower duct fits into resonator outlet.
5.2.
Install air box mount bolt.
5.3.
Install air cleaner.
5.4.
Install air cleaner lid. Ensure that the lid hinge is fully engaged in air box slots or the lid may not properly seal.
5.5.
Slide flexible hose and hose clamp on throttle body.
5.6.
Tighten hose clamp.