LW100 L4-2.2L VIN F (2002)
8. Install wire harnesses to fuse block case. The wire harness grommets have retaining tabs that lock into the case (3) when the harnesses are fully
installed.
9. Snap fuse block onto fuse block case hinges (1) .
10. Install following connectors from UHFB:
1) Engine 68-way
2) Forward Lamp 68-way
3) I/P 68-way
4) Forward Lamp 2-way (White)
5) I/P 2-way (Black)
6) I/P 2-way (Green)
7) I/P 2-way (Brown)
11. Secure UHFB to fuse block case by rotating down and snapping into place.
12. Install UHFB cover.
13. Install coolant hose into place on fuse block cover.
14. Install battery feed to UHFB.
Torque:
Battery Feed Cable-to-UHFB: 16 Nm (12 ft. lbs.)