LW2 V6-3.0L VIN R (2000)
53. Using a sharp knife, carefully cut hole in rear cargo area side carpeting (as indicated in illustration) for connector to go through.
54. Pull connector and harness through as far as possible.
55. Install rear cargo area side carpeting to vehicle with integral clips making sure carpet is slid under liftgate lower molding.
56. Install cargo net fasteners.
Torque: 2.5 N.m (22 in-lbs)
57. Using CD changer/player compartment as a template, mark with a pen or sharp tool where mounting holes should go through carpet.
58. Pull the CD changer/player compartment away and carefully cut the holes using a sharp knife.
59. Make electrical connection and verify that CD changer/player is functioning correctly.