LW2 V6-3.0L VIN R (2000)
![background image](/saturn/lw2/v6-3.0l_vin_r/Page-811001.png)
Coolant Line/Hose: Service and Repair
Return Hose
REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant. (Refer to "Draining Coolant".)
3. Remove return hose to surge tank clamp and remove hose from surge tank.
4. Open engine harness clip and push harness upwards to allow access to hose clamp.
5. Remove return hose to block fitting clamp.
6. Cut harness to return hose trap and remove return hose.
INSTALLATION