saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Transmission and Drivetrain > < Computers & Controls - MIL ON/DTC P0731 Set|Page 7923
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Change Oil Soon Lamp - Illuminates Too Soon

BULLETIN NO: 00-T-26

ISSUE DATE: May, 2000

CATEGORY TYPE: Engine-09

CATEGORY: Emission Controls

CORPORATION NO: 00-06-04-017

SUBJECT:
Change Oil Soon Lamp Illuminated With Low Mileage (Install New ECM/PCM Calibration)

MODELS AFFECTED:
2000 Saturn L-Series vehicles

CONDITION:
Some customers may comment about the Change Oil Soon lamp illuminating at lower mileage than expected after the lamp has been reset.

CAUSE:
A software calibration in the ECM/PCM determines when to illuminate the Change Oil Soon lamp based upon the number of crankshaft revolutions and
coolant temperature. The total number of crankshaft revolutions necessary to illuminate the change oil soon lamp was insufficient.

CORRECTION:
Install new ECM/PCM calibration according to the following calibration table. Refer to "Service Programming System (SPS)" in the Saturn Service Stall
System (SSS) User Guide for reprogramming procedures.

ECM/PCM Calibration

ECM/PCM CALIBRATIONS (CALIBRATION ID)

CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for J6355 (EE PROM
-Reprogramming), or if another procedure is performed, refer to the appropriate Electronic Labor Time Guide for the correct Labor Operation Code and
Time.

Disclaimer To Customer

Disclaimer

Transmission and Drivetrain > < Computers & Controls - MIL ON/DTC P0731 Set|Page 7923