LW2 V6-3.0L VIN R (2000)
Technical Service Bulletin # 01-T-23
Date: 010401
Ignition Lock Cylinder - Key Binds/Won't Turn
BULLETIN NO.: 01-T-23
ISSUE DATE: April, 2001
CATEGORY TYPE: Electrical - 01
CATEGORY: Locks and Security
CORPORATION NO.: 01-08-110-002
TECHNICAL INFORMATION BULLETIN
SUBJECT:
Ignition Key Binds or Does Not Turn Out of the LOCK Position
(Replace Ignition Lock Cylinder, Tumblers and Springs)
MODELS AFFECTED:
2000 - 2001 Saturn L-Series and S-Series Vehicles
CONDITION:
Some customers may comment that the ignition key will not turn out of the LOCK position.
CAUSE:
This condition is caused by one or more of the ignition cylinder tumblers binding in the ignition cylinder tumbler body.
CORRECTION:
Refer to the procedure detailed in this bulletin to replace ignition lock cylinder, tumblers, and tumbler springs.
IMPORTANT:
This bulletin contains separate service procedure for L-Series and S-Series Vehicles.
^
For L-Series vehicles, refer to this bulletin.
^
For S-Series vehicles, refer to this bulletin.
