LW2 V6-3.0L VIN R (2000)
19. Install underhood fuse block case to battery tray and install bolt.
Torque: 9 Nm (80 inch lbs.)
20. Install wire harnesses to fuse block case. The wire harness grommets have retaining tabs that lock into the case (3) when the harnesses are fully
installed.
21. Snap fuse block onto fuse block case hinges.
22. Install following connectors to underhood fuse block:
(1) Engine 68-way
(2) Forward Lamp 68-way
(3) I/P 68-way
(4) Forward Lamp 2-way (white)
(5) I/P 2-way (black)
(6) I/P 2-way (green)
(7) I/P 2-way (brown)
23. Secure underhood fuse block to fuse block case by rotating down and snapping into place.
24. Install underhood fuse block cover.