LW2 V6-3.0L VIN R (2000)
20. Install the rearview mirror; then slide it down toward the dash and tighten the screw.
Tighten the rear view mirror screw to 4 N.m (35 lb in).
21. Install the rear hood weather-strip.
22. Install the windshield wiper arm, washer, and nut.
Tighten the windshield wiper arm nut to 12 N.m (9 lb ft).
23. Install the wiper arm nut cap.
Important: The vehicle must remain at normal room temperature for 6 hours to complete the proper cure of the adhesive. Refer to the
manufacturer's recommendation.
24. Remove the blanket or cloth carefully from the instrument panel upper dash panel and defroster ducts.
