LW200 L4-2.2L VIN F (2003)
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the upper shoulder belt fastener.
Tighten the fasteners to 35 Nm (26 lb ft)
5. Snap the upper shoulder belt fastener cover into place.
6. Raise the rear seat back assembly.
7. Apply the weatherstrip over the front and rear of the side molding using a flat-bladed tool.
8. Install the cargo shade.
9. Function the shoulder belt assembly to assure the proper operation.
Garnish Molding Replacement - Rear Upper
Garnish Molding Replacement - Rear Upper
Removal Procedure